The mechanical seal of 206 reactor is double - end, multi - spring non - balance structure. The purpose of sealing is mainly achieved by the pressure difference between the sealing liquid and the sealed medium in the sealing cavity. The sealing liquid needs another device to circulate, and the whole system is more complex. Therefore, it is only used for sealing inflammable, explosive, toxic and strong corrosive media in special occasions. When the temperature exceeds 180 ° C, the cooling water tank should be set, and the installation height should be 80 mm. When the pressure is greater than 0.6MPa, the pressure balancing device should be used.

Working parameters

Rules: 30 ~ 160 mm

Pressure: 1.6 Mpa or less

The temperature: - 40-300 ℃

Speed: ≤500r/ min

Axial channeling momentum: ±0.5mm

Material combination

Sealing end face: graphite, silicon carbide, 304 butt welding

Auxiliary seal: fluorine rubber

Metal component: SUS304, SUS316L

The product description

Double face

Atmospheric terminal equilibrium type

Drive sleeve drive

Arbitrary spin to

In the development and design of any product, we follow the principle of installation size standardization. That is, the installation size of this type of mechanical seal is in line with the domestic HG5-748-78 standard (referred to as 78 standard) and HG2098-91 standard (referred to as 91 standard).